Ultra-DrainGuards®

Keep Oil-Sediment And Other Pollutants From Entering The Water System With Ultra-Drain Guard Catch Basin Inserts

Stormwater pollution has become a major concern both locally and on a national level. Ultra-DrainGuards remove
waste from stormwater before it can become a problem in the water system.

Installation is easily accomplished in just a few minutes!

Available in Three Models:

Oil and Sediment Model - Part #9225
Sediment Only Model - Part #9226
Trash and Debris Model - Part #9227

Step 1 - Remove Grate.	Step 2 - Insert DrainGuard.	Step 3 - Replace Grate. Trim excess material if desired.

Designed For Practical Use In:

Industrial Facilities - keep oil and other contaminants from entering storm drains.
Construction Sites - tubular design captures eroded soil and wind-blown debris.
Parking Lots, "Drive-Up" Retail Facilities - polypropylene geotextiles collect oil, fuel and other contaminants that drip from cars.

Unique PopUp Capacity Indicator* Automatically Signals When It's Time To Install A New Ultra-DrainGuard

Click For Larger Image	Click For Larger Image	Click For Larger Image
Heavy duty magnet securely attaches the reusable indicator to the bottom of the grate.	A tether is attached to a release hook which disengages when the DrainGuard has reached its capacity.	The bright red end cap "pops up" through the grate to visually alert maintenance personnel that the DrainGuard need to be emptied or replaced. The spring-loaded device can be driven over even in the "popped up" position.
Click For Larger Image	Click For Larger Image	Click For Larger Image
The Oil and Sediment Model contains a replaceable oil absorbent pillow that removes oil and grease from water flow as it passes through the DrainGuard. Choose the non-leaching Rubber Particulate Pillow or the highly absorbent Polypropylene Pillow.	The Trash and Debris Model is designed specifically to catch larger items such as cigarette butts, candy wrappers and paper goods.	The Sediment Only Model removes dirt, sand and other sediment from stormwater. Ideal for a construction site sediment control.
* Note: The PopUp Capacity Indicator is not designed for use with the Trash and Debris Model. U.S. Patent No. 5,372,714; 5,575,925

SPECIFICATIONS
	Oil and Sediment Model	Sediment Only Model	Trash and Debris Model
Part #:	9225: Rubber Particulate Pillow (1-Pack) 9224: Rubber Particulate Pillow (10 Pack)9222: Polypropylene Pillow (1-Pack) 9221: Polypropylene Pillow (10-Pack)	9226 - 1-Pack 9228 - 10-Pack	9227 - 1-Pack 9229 - 10-Pack
Fabric Weight:	8.0 oz / yd²	8.0 oz / yd²	Not Applicable
Thickness:	145 mil.	145 mil.	Not Applicable
Water Flow Rate:	120 gpm / ft²*	120 gpm / ft²*	Not Applicable
Permeability:	.5 cm / sec	.5 cm / sec	Not Applicable
Dimensions:	48" L x 36" W x 23" H	48" L x 36" W x 23" H	48" L x 36" W x 18" H
Weight:	2 lbs.	1 lbs.	1 lbs.
Options:	Replacement Rubber Particulate Pillow (case of 10) Part #9233 Replacement Polypropylene Pillow (case of 10) Part #9223	None	None
Accessories	PopUp Capacity Indicator (Part #9236), Grate Lifting Hook (Part #9235)
	* The total water flow rate through the insert in new condition is in excess of 500 gpm. The overflow rate is approximately 250 gpm.

Stop Spills From Going Down The Drain

Click For Larger Image

Click here for instructions and MSDS on this product
(Adobe Acrobat required).

Reinforced mesh is "sandwiched" between layers of polyurethane - increases durability and resistance to tearing.
Unique, urethane construction allows the pad to deform and seal off most drains — temporarily "seals" to any smooth surface.
A valuable addition to any emergency response plan, spill kit or stormwater management program.

Unlike some alternative products, BOTH sides will quickly seal drains - there is no specified "top" or "bottom".

Standard Sizes:
18" x 18" Part# 2126
24" x 24" Part# 2127
36" x 36" Part# 2130
48" x 48" Part# 2132

Click For Larger Image

Reinforced mesh resists tearing.

SPECIFICATIONS
Flexible polyurethane material with reinforced, tear-resistant mesh	Non-Absorbing Material	18" x 18" x 3/8" thick pad Weight: 5 lbs
One unit per box	Easily Cuts to special shapes,sizes	24" x 24" x 3/8" thick pad Weight: 9 lbs
Resists oil,water and most aggressive chemicals	Cleans with soap and water	36" x 36" x 3/8" thick pad Weight: 19 lbs
Prevents contaminants from entering drain	Safety Orange color	48" x 48" x 3/8" thick pad Weight: 34 lbs

New! Optional Ultra-DrainSeal WallMount Units allow quick response to any spill - just "grab and go"!

SPECIFICATIONS
Fits 18" x 18" and 24" x 24" Ultra-DrainSeals	Part# 2140
Fits 36" x 36" Ultra-DrainSeals	Part# 2142
Fits 48" x 48" Ultra-DrainSeals	Part# 2143
Made of HDPE. Velcro straps allow quick and easy access.	Mounting hardware included

Click For Larger Image

Tapered design wedges securely into standard drains to stop any flow.
Eyebolts are removable, allowing installation of grating with DrainPlug in place.
Non-absorbing, easily cleaned for repeated use.

Click For Larger Image

Standard Sizes:
2" Diameter Part# 2113
3" Diameter Part# 2114
4" Diameter Part# 2115
3-Plug Kit Part# 2116 - Includes (1) piece of each size DrainPlug and carrying case.

SPECIFICATIONS
Flexible polyurethane material	Non-absorbing material	2" diameter conical plug Weight: 1.5 lbs
Resists oil,water and most aggressive chemicals	Cleans with soap and water	3" diameter conical plug Weight: 2 lbs
Prevents contaminants from entering drain	Safety Orange color	4" diameter conical

ROOF TOP PROTECTION GULLY GUARD

Spill Pallets Spill Berm Drum Storage Decontamination

If you have questions on drain guards or any other oil and sediment product for stormwater please call us at 1-800-474-7294