|
GR-GR GRAFFITI MAGIC….
Naturally powered Graffiti Remover takes off Paint, Graffiti, Grease, &
More. This natural Jell formula is a non-toxic and biodegradable remover that
does not use toxic chemicals such as methylene chloride. Will remove most
ink, lipstick, magic marker and other forms of graffiti. Because it’s a Jell
it removes the graffiti mess without making one.
IPIAC-711 PAINTABLE GRAFFITI REMOVER...Solvent based formulation with low VOC for more difficult
graffiti removal. Combination of lower VOC and stronger cleaning power. Removes
marker, ink, graffiti on walls, stainless steel, partitions, traffic signs and
non-porous surfaces.
Environmentally safe with citrus base. Natural answer to graffiti removal. Use
indoors or outdoors as it is a non hazardous solution. Apply and let sit a few
minutes and wipe away. A second application may be needed depending on soil
load. For medium to heavy removal situations.
IPIAC-709 PAINT, GRAFFITI, AND VARNISH REMOVER...An
environmentally friendly solvent based product with clinging ability for
removing the toughest graffiti or coatings from horizontal, vertical or downward
surfaces. Quickly and easily removes the toughest paints and graffiti. This
product is an efficient product for removing graffiti , old varnish and urethane
from wood or concrete floors, terrazzo, ceramic and more. Pour or brush on
graffiti remover, brush or wash away old coatings with strong jets of
water. Allow to remain in contact until "Blisters" are observed.
Typical waiting times are 1 minute for alkyd paints, 30 minutes for epoxy and 2
to 3 hours for urethane. Excellent graffiti
remover for brick as it shouldn't fade out brick surfaces. Heavy duty jell
formula for exterior brick.
IPIAC-703 GRAFFITI REMOVER...Designed
for marker, inks, ball point inks, stencil ink, crayon and lipstick and light
graffiti for indoors or out. Spray or sponge on graffiti remover onto to surface
to be cleaned and wipe with clean cloth. If soil is stubborn, repeat application
and allow to stand for 15 to 45 seconds and wipe clean. If extremely stubborn
use bristle brush to agitate graffiti. For exterior masonry surfaces wet area,
spray on product and allow to penetrate until mark begins to loosen. Use medium
hard nylon brush to dissipate stain or mark. Always use with adequate
ventilation. Avoid contact and wear gloves.
IPIAC-705 GRAFFITI REMOVER...Paintable graffiti remover which penetrates through graffiti, ink, crayons
and more quickly. This formula is a highly alkaline remover that will dissolve
graffiti and make removal of unsightly markings fast and easy. Will remove most
paint, markers and many other forms of graffiti. Contains potassium hydroxide
but no methylene chloride. For exterior masonry surfaces only. Do not use on
metals or other alkali sensitive surfaces like chrome, copper, etc.. Apply
with long handled natural fibered brush and allow to sit for 5 to 12 minutes as
needed and rinse with water. Hot water with 3000 PSI is best but if can be used
with high pressure cold water as well if needed. A second application may be
needed for stubborn graffiti. Ships with hazardous shipment fee.
AC-740G- GRAFFITI GUARD...A
clear coating used to form a barrier between surfaces and graffiti. This product
makes graffiti less damaging to surfaces it is applied to. Graffiti guard
creates a barrier so paints do not penetrate surfaces. This action makes a
graffiti remover work quick and easy. Coverage is about 400 sq' ft' per gallon
and good for all porous surfaces as protective barrier ands makes graffiti
removal easy.
GRAFFITI
TOWEL REMOVER
Any Questions on a graffiti remover,
please call us at 1-800-474-7294.
info@interstateproducts.com
|
